<tr id="FZyBVh"></tr>
    <em></em>

      3. <dl id="FZyBVh"></dl>
        

        
  
        
    
  
        
  
        
    
  
        

        


        
  
  
        
    
        
      
        
        
        
        
          
        
            
        
              
        
                
                
        
                
                
        
              
        
            
        
            
        
              
        Photovoltaic Auto safety comprehensive tester
        
              
         Product Description：Name：Photovoltaic Auto safety comprehensive testerType：BND-CS9933EG-15Standards: IEC61730; IEC61215; IEC 61646Description of PV safety tester:Photovoltaic safety tester is used to test PV module, cable, connector, terminal box, …etc which can deal with high voltage and high sensitivity insulation test. There are two functions that are high voltage test and insulation resistance test in total.
        
              
              
            
        
          
        
          
        
            
        Description
        
            
         
        Product Description：
        Name：Photovoltaic Auto safety comprehensive tester
        Type：BND-CS9933EG-15
        Standards: IEC61730; IEC61215; IEC 61646

        Description of PV safety tester:
        Photovoltaic safety tester is used to test PV module, cable, connector, 
terminal box, …etc which can deal with high voltage and high sensitivity 
insulation test. There are two functions that are high voltage test and 
insulation resistance test in total.
        According to the IEC61730 standard(photovoltaic module safety 
qualification—part I: Requirements for construction which describes the 
fundamental construction requirements for photovoltaic modules in order to 
provide safe electrical and mechanical operation during their expected 
lifetime), the definition of PV module application is divided into A, B, C.
        The current measuring terminal can choose the grounding mode or the floating 
mode. Insulation voltage withstand test of photovoltaic module is based on the 
application of IEC61215/61646 and the maximum voltage of the system.
        Maximum test voltage for the application class A:2000V plus 4 times the 
maximum system voltage
        For the maximum voltage application category B:1000V system 2 times
        According to the calculation of a maximum voltage of 8000V, CS9923GS, CS9923G 
is based on this standard production
        According to the calculation of the maximum voltage B 6000V, CS9922G, 
CS9922GS is based on this standard production

        Performance characteristics:
        ◆With safety anti-electric wall function, it can automatically detect whether 
the input power is correct
        ◆For photovoltaic system panels, controllers, and battery packs
        ◆After the DC withstand voltage and insulation resistance tests are 
completed, the tester can quickly discharge within 0.2 seconds to protect the 
safety of the operator
        ◆With current lower limit alarm function, it can prevent the open circuit of 
the test line from causing misjudgment of the tested components during the test. 
The output voltage has voltage upper limit and voltage lower limit alarm 
functions
        ◆With keyboard lock function to prevent the operator from modifying the test 
parameters and ensure that the tested object is tested according to the set 
parameters
        ◆Linear power amplifier drives the output of sinusoidal voltage (current), 
and the crest factor is within the range of 1.3 to 1.5
        ◆Adopts 240*64 graphic LCD display and humanized interface design
        ◆With Chinese and English display interfaces, it can meet the different needs 
of different users.
        ◆Test parameters can be saved in advance: 30 files can be set, and each file 
can have 99 test steps
        ◆Optional RS232, RS485, USB interface, standard PLC interface
        pv-auto-safety-tester (1).jpg

        The Specification of the PV safety test system:
        Model
        BND-CS9933EG-15








        ACW

        The output voltage
        Range
        0.050kV～6.500kV
        Accuracy
        ±(1.5% reading + 5V)
        Resolution
        1V
        Maximum output power
        130VA（6.500kV/20mA）
        Maximum rated current
        20mA
        Lower current range
        0～20mA, 0=no lower limit
        Current range
        200uA, 2mA, 20mA
        Output waveform
        Sine wave
        Output waveform distortion
        ≤2% (no load or pure resistive load)
        Crest factor
        1.3～1.5
        Output signal type
        DDS+ amplifier
        Voltage rise time
        0.3s～999.9s 0=voltage rise time off
        Test time
        0.3s～999.9s 0=continuous test
        Voltage fall time
        0.3s～999.9s 0=voltage fall time off
        Interval time
        0.0s～999.9s 0=interval time off
        Output voltage mode
        N-mode, G-mode






        DCW





        The output voltage
        Range
        0.050kV～6.500kV
        Accuracy
        ±（1.5％Value +5V）
        Resolution
        1V
        Maximum output power
        65W（6.500kV/10mA）
        Maximum rated current
        10mA
        Current range
        2uA、20uA、200uA、2mA、10mA
        Ripple factor
        ≤5%
        Discharge time
        ≤200ms
        Maximum charge current
        10mA
        Voltage rise time
        0.3s～999.9s 0=voltage rise time off
        Test time
        0.3s～999.9s 0=continuous test
        Voltage drop time
        0.3s～999.9s 0=voltage drop time off
        Interval time
        0.0s～999.9s 0=interval time off
        Delay alarm time
        0.3s～999.9s 0=delay alarm time off
        Output voltage mode
        N mode, G mode

        IR


        The output voltage
        Range
        0.050kV～1.500kV
        Accuracy
        ±（1.5% reading +5V）
        Resolution
        1V
        Maximum upper limit setting value
        50.00GΩ



        Maximum and minimum setting values
        50.00GΩ
        Minimum setting values
        1MΩ
        Voltage rise time
        0.3～999.9s 0=voltage rise time off
        Test time
        0.3s～999.9s 0=continuous test
        Interval time
        0.0s～999.9s 0=interval time off
        Automatic gear switching
        Can be set to on or off
        Discharge time
        ≤200ms






        GR

        Output current
        Range
        3.00A～52.00A(DC)
        Accuracy
        ±（1.5％ Value +0.2A）
        Resolution
        0.01A
        Maximum output power
        250W（50A/0.10Ω）
        Maximum output current
        50AW
        Resistance upper limit setting value
        40A x150mW
        Set current value
        Output waveform
        Sine wave
        Output waveform distortion
        ≤2% (no load or pure resistive load)
        Crest factor
        1.3～1.5
        Output signal type
        DDS+power amplifier
        Test time
        0.3s～999.9s 0=continuous test
        Interval time
        0.3s～999.9s 0=interval time off
        Voltmeter

        Range
        0.050kV～6.500kV
        0.050kV～6.500kV
        0.050kV～6.500kV
        0.050kV～6.500kV
        Accuracy
        ±(1.5% reading +5V)
        Resolution
        1V
        Display value
        RMS value


        Withstand voltage ammeter
        Measure range
        AC
        0 ～ 20mA
        DC
        0 ～ 10mA

        Resolution
        AC
        200uA: 0.1uA, 2mA: 1uA, 20mA: 10uA
        DC
        2uA: 0.001uA, 20uA: 0.01uA, 200uA: 0.1uA, 2mA: 1uA,
        10mA: 10uA
        Measurement accuracy
        ≥2mA: ±(1.5%+5 digits), <2mA: ±(2%+5 digits)
        Offset function
        The current of the test leads and accessories can be subtracted.
        Test mode
        GND mode: RETURN terminal connected to the chassis
        FLOAT mode: RETURN terminal not connected to the chassis

        Measurement range
        1MΩ～50000MΩ

        Resolution
        1MΩ～9.999MΩ:0.001MΩ,10MΩ～99.99MΩ:0.01MΩ,
        100MΩ～999.9MΩ:0.1MΩ,1000MΩ～9999MΩ:1MΩ
        10GΩ～50GΩ:10MΩ
        Insulation resistance meter


        Accuracy
        0.100kV～0.200kV:1MΩ～999MΩ ±5%，1000MΩ～3000MΩ ±10%
        0.201kV～0.499kV:1MΩ～999MΩ ±5%，1000MΩ～5000MΩ ±10%
        0.500kV～1.000kV:1MΩ～999MΩ ±5%，1000MΩ～9999MΩ ±10%
        10000MΩ~50000MΩ ±15%
        Ground current meter
        Measuring range
        3.00A～52.00A
        Resolution
        0.01A
        Accuracy
        ±(1.5% of reading + 0.2A)
        Display value
        RMS value
        Ground resistance meter
        Range
        0～510mΩ
        Accuracy
        When the current is less than 5.00A, it is ± (3% of reading + 3mΩ) When the current is ≥ 5.00A, it is ± (2% of reading + 2mΩ)
        Resolution
        0.1mΩ
        Measuring method
        Four-terminal method
        Timer
        Range
        0～999.9s
        Resolution
        0.1s
        Accuracy
        ±（0.1%+50ms）
         
        
          
        
        
        
      
        
    
        
  
        

        


        
  
        
  
        
    
  
        

        





 
 
  
 



JINiqjavascript:void();

        <tr id="FZyBVh"></tr>
          <em></em>
            3. <dl id="FZyBVh"></dl>