<tr id="FZyBVh"></tr>
    <em></em>

      3. <dl id="FZyBVh"></dl>
        

        
  
        
    
  
        
  
        
    
  
        

        


        
  
  
        
    
        
      
        
        
        
        
          
        
            
        
              
        
                
                
        
                
                
        
              
        
            
        
            
        
              
        MT10 SDI-12 Output Soil Temperature And Moisture Sensor
        
              
         We designed the MT-10 to measure the water content, electrical conductivity, and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to measure the dielectric permittivity of soil to determine the water content. A thermistor in thermal contact with the sensor prongs provides the soil temperature. The Polyurethane coating on the MT-10 circuit board protects the components from water damage and gives the sensor a longer life span.
        
              
              
            
        
          
        
          
        
            
        Description
        
            
         
        Product Description：
        Name：MT10 SDI-12 Output Soil Temperature And Moisture Sensor
        Type：BND-MT10
        We designed the MT-10 to measure the water content, electrical conductivity, 
and temperature of soil. The MT-10 uses an oscillator running at 70 MHz to 
measure the dielectric permittivity of soil to determine the water content. A 
thermistor in thermal contact with the sensor prongs provides the soil 
temperature. The Polyurethane coating on the MT-10 circuit board protects the 
components from water damage and gives the sensor a longer life span.

        Specifications
        Volumetric Water Content
        Range: 0 (air) to 100 (water)

        Temperature
        Range: -40 to 80 ℃
        Resolution: 0.01 ℃
        Accuracy:±0.5 ℃

        General
        Dimensions: 10 cm (1) x 3.2 cm (w) x 0.7 cm (d)
        Prong Length: 5.2 cm
        Dielectric Measurement Frequency: 70 MHz
        Measurement Time: 150 ms (milliseconds)
        Power requirements: 3.6 to 30 VDC, 0.3mA quiescent, 10mA during 150 ms 
measurement

        Output: SDI-12 / RS485 MODBUS RTU
        Operating Temperature: -40 to 80 ℃
        Connector Types: 3.5 mm (stereo) plug or stripped & tinned lead wires 
(Pigtail)
        Cable Length: 5 m standard; Maximum 75 m. Please contact if you need longer 
cable lengths.

        PHYSICAL CHARACTERISTICS
        SENSOR NAME
        MT10
        DIMENSIONS
        10 cm X 3.2 cm
        CABLE LENGTH
        5 meters
        * Custom cable lengths are available for an additional cost.

        Type Selections
        Code number
        Code
        Code info.
        Code1：model
        MT10

        Code2：Measurement parameters
        A
        B
        Soil moisture, Soil temperature（SDI-12）
        Soil moisture, Soil temperature, soil electrical conductivity (EC). Three parameter measurement（RS485 ONLY）
        Code3：
        Soil moisture range
        A
        0-100%
        Code4：
        Electrical conductivity range（RS485 ONLY）
        A
        B
        C
        D
        0-5000us/cm （RS485 ONLY）
        0-10000us/cm（RS485 ONLY）
        0-20000us/cm（RS485 ONLY）
        NONE
        Code5：
        CONNECTION TYPES
        A
        B
        PIGTAIL CABLE
        STEREO CABLE （SDI-12 ONLY）
        Code6：Output
        A
        B
        SDI-12
        RS485 MODBUS RTU
        Code 7：cable lengths
        005
        XXX
        5 meters
        Custom, XXX is an arbitrary length (unit: m)
        Model example：
        MT10 Sensor, Soil moisture, Soil temperature, soil moisture range is 0-100%, interface SDI-12, connection type is STEREO CABLE, 5 meters cable length.
        Type selection code：MT10 - A A D B A 005
         
        
          
        
        
        
      
        
    
        
  
        

        


        
  
        
  
        
    
  
        

        





 
 
  
 



QMcERjavascript:void();

        <tr id="FZyBVh"></tr>
          <em></em>
            3. <dl id="FZyBVh"></dl>